Online Nickel Analyser
Configure nickel analysis for the concentration range and matrix found at the selected sample point.
Online Nickel Analyser with 3S
Nickel monitoring can support selected industrial process-water and wastewater applications where more frequent measurement helps operators track treatment or discharge conditions. The 3S-CL performs a repeatable programmed wet-chemistry cycle for the selected method.
Sample colour, suspended solids, other metals and process chemistry may influence the application review. PMA therefore considers the complete matrix and any pretreatment requirement before specifying the analyser setup. Explore the 3S-CL colorimetric analyser, review 3S applications or discuss sample preparation with PMA Support.
Repeatable online nickel measurement in a compact analyser
The programmed sequence handles the sample and reagents automatically, allowing operators to review nickel results and analyser status through the integrated touchscreen.
01 / NICKEL METHOD
Parameter-specific nickel measurement
The configured 3S-CL runs a parameter-specific wet-chemistry sequence for nickel, with the exact chemistry and range selected for the sample and monitoring objective.
- Parameter-specific wet-chemistry sequence
- Freely programmable analysis frequency
- Automatic result calculation
02 / AUTOMATIC ROUTINES
Calibration, validation and cleaning
Automatic routines can be scheduled at selectable intervals to support repeatable nickel monitoring between planned maintenance visits.
- Automatic calibration
- Automatic validation
- Automatic cleaning
Nickel analyser information
Core 3S-CL information for nickel method and installation review. The final chemistry, range and sample arrangement should be confirmed for the application.
Flexible installation
Wall or rack mounting is supported in the standard vertical arrangement.
Defined sample handling
A pressure-free sample reservoir presents flow to the analyser.
Process integration
Analog outputs and Modbus RTU RS485 support plant integration.
Operator records
The integrated datalogger supports USB result export.
Designed for practical nickel monitoring
The 3S separates its electronic and wet compartments while keeping nickel results, analyser status and configuration accessible through the colour touchscreen.
Touchscreen
Review nickel results, status information and analyser functions.
Automatic routines
Calibration, validation and cleaning run at selectable intervals.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Reagent consumption is confirmed for the selected chemistry and programmed analysis frequency.
Nickel analyser technical specifications
Core 3S-CL information for specification and application review.
| Measured parameter | Nickel |
| Measurement principle | Parameter-specific colorimetric method using spectroscopic colour-development measurement |
| Measuring variables | Chemistry and range selected for the approved application |
| Analysis frequency | Approximately 6–20 minutes, depending on the selected parameter and chemistry |
| Power supply | 110–230 VAC, 50/60 Hz, 80 VA; optional 24 VDC |
| Operating conditions | 5–45°C; maximum 85% RH |
| Cabinet and protection | Epoxy-coated stainless steel; IP54 |
| Sample streams | One or two, with further expansion available through an optional sequencer |
| Outputs | 2 × 4–20 mA; Modbus RTU RS485 |
| Automatic functions | Calibration, validation and cleaning |
Parameter-specific chemistry, range and performance should be confirmed against the latest approved 3S documentation before procurement.
Discuss Your Nickel Measurement
Share the process source, expected nickel range, other relevant constituents and sample condition so method suitability can be reviewed. Visit PMA, compare the PMA 3S product information, or read how a configurable colorimeter can help reduce operating expenditure.
WIN A GOOGLE PIXEL TABLET
From low level colour monitoring to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.